Setting page size to show bleeds

[Scott White]

I bet that is it. Didn't know that on the pc.
-- 
Scott White
Media Production Manager
AlaMark Technologies
210-704-8239
swhite at alamark.com


> From: <pxenson at comcast.net>
> Date: Mon, 27 Feb 2006 22:16:19 +0000
> To: Scott White <swhite at alamark.com>, Framers <framers at FrameUsers.com>
> Subject: Re: Setting page size to show bleeds
> 
> Is Generate Acrobat Data is turned on in the Print dialog? If it is, you won't
> get  crops or bleeds.
> 
> Pat Christenson
>  -------------- Original message ----------------------
> From: Scott White <swhite at alamark.com>
>> Folks
>> I was at a client's site last week and training the clients on our software
>> and framemaker on the PC.
>> When it came to distilling the files and creating pdfs that show bleeds I
>> could not get the pages to cooperate. I went in and changed the print output
>> from letter size to tabloid and I also changed my distiller page size to
>> tabloid. I selected show crop marks.
>> After creating the postscript file and then opening that file in distiller
>> the pdf page format was still letter size which of course showed no bleeds
>> nor crops marks.
>> I use a MAC here and these steps are how I create my printer pdfs on the
>> Mac. I then can show both the bleed tabs and crop marks. I have not done
>> much outputting with a pc version of Frame. IS there something I missed?
>> Client was using Frame 7.1, distiller 7.0.
>> I use frame 7.0 distiller 5.0.
>> -- 
>> Scott White
>> Media Production Manager
>> AlaMark Technologies
>> 210-704-8239
>> swhite at alamark.com
>> 
>> 
>> _______________________________________________
>> 
>> 
>> You are currently subscribed to Framers as pxenson at comcast.net.
>> 
>> Send list messages to framers at lists.frameusers.com.
>> 
>> To unsubscribe send a blank email to
>> framers-unsubscribe at lists.frameusers.com
>> or visit 
>> http://lists.frameusers.com/mailman/options/framers/pxenson%40comcast.net
>> 
>> Send administrative questions to lisa at frameusers.com. Visit
>> http://www.frameusers.com/ for more resources and info.
> 
>