PDF weirdness

[Pinkham, Jim]

Good luck, Cynthia.  I've forgotten all of the details, but I've had
this happen in FM 6 and FM 7, too, so we can't blame FM 9 for this one. 

I'm pretty sure the settings were on the Frame side. Sorry if a bit
vague, but I'd suggest you double-check the Print Setup settings at the
book level and make sure you have A4 under Paper - Size. Hopefully,
you're printing to the Adobe PDF instance. Double-check the Adobe
settings and make sure that page size is A4 also. The other place to
check is the Page Size settings under Format - Document - PDF setup. Do
this at the book level and you can handle every chapter at once. If all
three of those spots (Print Setup, Adobe PDF Page Size, and Format Doc)
are set for A4, you should be good. If not, hopefully others on the list
will have further ideas.

HTH,
Jim


 

-----Original Message-----
From: framers-bounces at lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Milton,
Cynthia
Sent: Thursday, May 27, 2010 8:02 AM
To: framers at lists.frameusers.com
Subject: PDF weirdness


 
Classification: NOT PROTECTIVELY MARKED

Good afternoon all.

One of my engineers came to me today having printed out a PDF I sent him
(FM9p250, WinXP SP3).

Not a dry seat in the house - the (A4) page was a tiny rectangle in the
middle of the sheet. When I fired up the PDF in Reader on my laptop it
reported being displayed at 779% of actual size. Well, roll me over and
thrash me with a stick of limp celery.

I've checked every setting I can find and there's nothing obvious.
Anyone come across this before?

Cynthia Milton - 0773 889 5991
Technical Documentation (Cyclamen - Rollestone)

 
Classification: NOT PROTECTIVELY MARKED

This e-mail and any attachments may contain sensitive and/or privileged
material. It is for the intended addressee(s) only. If you are not a
named addressee, you must not use, retain or disclose such information.

Serco cannot guarantee that the email or any attachments are free from
viruses.

The views expressed in this email are those of the originator and do not
necessarily represent the views of Serco.

Nothing in this email shall bind Serco in any contract or obligation.

Please note that all email messages sent to Serco are subject to
monitoring/interception for lawful business purposes.

Serco Group PLC. Registered in England and Wales. No:
2048608.

Registered Office: Serco House, 16 Bartley Wood Business Park, Bartley
Way, Hook, Hampshire, RG27 9UY.
_______________________________________________


You are currently subscribed to framers as jim.pinkham at voith.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/jim.pinkham%40voith.
com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.