Mif2Go suddenly failing on all machines
Scott Prentice
sp10 at leximation.com
Thu Aug 14 14:47:23 PDT 2014
John...
This is just grasping at straws .. but do you have extra DLLs in the
\fminit\Plugins folder? All FDK DLLs in that folder (or subfolders) get
loaded when FM starts. If you've got extra DLLs that are duplicates of
others that could cause some problems.
I can't say what the proper list of mif2go DLLs should be, but if you
added two new ones, you may have needed to remove the two that were
being replaced.
And .. don't just move the old ones into a subfolder called "old" ..
they will get loaded there too.
...scott
On 8/14/14 2:40 PM, John Sgammato wrote:
> Here's the latest, after an afternoon of research (= banging my head
> against the wall):
>
> * The project fails almost immediately, with this error:
> Mif2Go failed for file: C:\Project\Users_Roles.html type 1, code
> 2, at: Wed Aug 13 15:46:36 2014
> Could not run DCL filter or other program. File not found.
> * All Mif2Go files are present and in the right places following an
> uninstall and fresh install from new ZIP. This means I do not know
> what file cannot be found.
> * I get the same failure even for projects that succeeded earlier in
> the day, with the same previously-successful ini files.
> * I have used (and resolved issues with) Mif2Go for 10 years, so I
> know how things should look - they look OK.
> * The save process generates good MIFs. I get the same error for
> each file, with the option to quit. If I do not quit, it makes a
> mif for the next file and then I get the error again. Mif2Go.ini
> increments normally for each file generated.
> * If I push through to the end, it generates all the MIFs but it
> does not clean them up and it generates no output, nor the _wrap
> folder.
> * The history and the log file look normal.
> * All the Mif2Go exe & dll files have full write permissions,
> including the two new ones in \fminit\Plugins.
>
> And remember that the whole system worked flawlessly for two big books
> before failing on the third, much smaller book just an hour later.
> I appreciate any ideas!
>
>
> On Thu, Aug 14, 2014 at 1:18 PM, Fei Min Lorente
> <FeiMin.Lorente at onsemi.com <mailto:FeiMin.Lorente at onsemi.com>> wrote:
>
> Nope, sorry, I should have mentioned. I'm on FM10, Windows 7,
> using Mif2Go V4U54.
>
> Fei Min
>
> *From:*John Sgammato [mailto:john.sgammato at actifio.com
> <mailto:john.sgammato at actifio.com>]
> *Sent:* Thursday, August 14, 2014 1:15 PM
> *To:* Fei Min Lorente
> *Cc:* framers at lists.frameusers.com
> <mailto:framers at lists.frameusers.com>
> *Subject:* Re: Mif2Go suddenly failing on all machines
>
> Are you on FM12?
> There were two new DLLs in FMINIT/Plugins for FM12.
>
> On Thu, Aug 14, 2014 at 1:12 PM, Fei Min Lorente
> <FeiMin.Lorente at onsemi.com <mailto:FeiMin.Lorente at onsemi.com>> wrote:
>
> Hi John:
>
> I just did a Save Using Mif2Go on an old tried and true manual,
> and everything worked just fine.
>
> Fei Min
>
> ------------------------------
>
> Message: 13
> Date: Wed, 13 Aug 2014 18:18:24 -0400
> From: John Sgammato <john.sgammato at actifio.com
> <mailto:john.sgammato at actifio.com>>
> To: Lin Sims <ljsims.ml at gmail.com <mailto:ljsims.ml at gmail.com>>
> Cc: framers at lists.frameusers.com <mailto:framers at lists.frameusers.com>
> Subject: Re: Mif2Go suddenly failing on all machines
> Message-ID:
> <CAKwJh11XjZFNVpgDEeA0MG=xi=0Q1oDxd0TZBsYvta=DDW1vNw at mail.gmail.com <mailto:DDW1vNw at mail.gmail.com>>
> Content-Type: text/plain; charset="utf-8"
>
> I'd be very grateful if a few of my colleagues here could try a quick
> mif2go save and see if you get the DCL not found error.
> On Aug 13, 2014 6:15 PM, "Lin Sims" <ljsims.ml at gmail.com
> <mailto:ljsims.ml at gmail.com>> wrote:
>
> > And if you do find a fix, let us know, just in case someone else
> runs into
> > the same issue.
> >
> >
> > On Wed, Aug 13, 2014 at 4:00 PM, Scott Prentice
> <sp10 at leximation.com <mailto:sp10 at leximation.com>>
> > wrote:
> >
> >> If you don't get anything here, you might try the new mif2go
> list ..
> >>
> >> https://groups.yahoo.com/neo/groups/mif2go/info
> <https://groups.yahoo.com/neo/groups/mif2go/info>
> >>
> >> ...scott
> >>
> >> On 8/13/14 12:53 PM, John Sgammato wrote:
> >>
> >> Yesterday I was generating a bunch of XHTML output with Mif2Go,
> when
> >> suddenly I started to fail with this error:
> >> Mif2Go failed for file: C:\Project\Users_Roles.html
> >> type 1, code 2, at: Wed Aug 13 15:46:36 2014
> >> Could not run DCL filter or other program.
> >> File not found.
> >>
> >> It had worked fine just an hour before. Nothing had changed.
> >> Nonetheless I rechecked all my environment variables and other
> common
> >> issues; they were all good.
> >> Restarting the machine did not fix it. A complete
> uninstall/reinstall of
> >> Mif2Go did not fix it.
> >> Today is does not work on two different computers with
> different files.
> >>
> >> Is anyone else experiencing this?
> >> It's as if my license has been revoked or some similar global
> denial of
> >> service.
> >>
> >> --
> >>
> >> <http://www.actifio.com/> *John Sgammato, Documentation
> >> Architect*
> >> *e* john.sgammato at actifio.com
> <mailto:john.sgammato at actifio.com> *c* 508.927.2083
> <tel:508.927.2083>
> >> *t* @actifiodocs <http://twitter.com/actifiodocs>
> >>
> >> 333 Wyman Street, Waltham, MA 02451
> >> <http://twitter.com/actifio>
> >> <http://www.linkedin.com/company/399246>
> >> <https://plus.google.com/102870897962348937868/posts>
> >> <http://www.youtube.com/user/actifio> <http://www.actifio.com/>
> >>
> >> *Radically simple copy data management *
> >>
> >> *.*
> >>
> >>
> >> _______________________________________________
> >>
> >>
> >> You are currently subscribed to framers as sp10 at leximation.com
> <mailto:sp10 at leximation.com>.
> >>
> >> Send list messages to framers at lists.frameusers.com
> <mailto:framers at lists.frameusers.com>.
> >>
> >> To unsubscribe send a blank email
> toframers-unsubscribe at lists.frameusers.com
> <mailto:toframers-unsubscribe at lists.frameusers.com>
> >> or visit
> http://lists.frameusers.com/mailman/options/framers/sp10%40leximation.com
> >>
> >> Send administrative questions to listadmin at frameusers.com
> <mailto:listadmin at frameusers.com>. Visithttp://www.frameusers.com/
> <http://www.frameusers.com/> for more resources and info.
> >>
> >>
> >>
> >> _______________________________________________
> >>
> >>
> >> You are currently subscribed to framers as ljsims.ML at gmail.com
> <mailto:ljsims.ML at gmail.com>.
> >>
> >> Send list messages to framers at lists.frameusers.com
> <mailto:framers at lists.frameusers.com>.
> >>
> >> To unsubscribe send a blank email to
> >> framers-unsubscribe at lists.frameusers.com
> <mailto:framers-unsubscribe at lists.frameusers.com>
> >> or visit
> >>
> http://lists.frameusers.com/mailman/options/framers/ljsims.ml%40gmail.com
> >>
> >> Send administrative questions to listadmin at frameusers.com
> <mailto:listadmin at frameusers.com>. Visit
> >> http://www.frameusers.com/ for more resources and info.
> >>
> >>
> >
> >
> > --
> > Lin Sims
> >
> _______________________________________________
> You are currently subscribed to
> framers.
> To unsubscribe send a blank email to
> http://lists.frameusers.com/mailman/listinfo/framers
> Send administrative questions to listadmin at frameusers.com
> <mailto:listadmin at frameusers.com>. Visit
> http://www.frameusers.com/ for more resources and info.
>
> End of framers Digest, Vol 106, Issue 12
> ****************************************
> _______________________________________________
>
>
> You are currently subscribed to framers as
> john.sgammato at actifio.com <mailto:john.sgammato at actifio.com>.
>
> Send list messages to framers at lists.frameusers.com
> <mailto:framers at lists.frameusers.com>.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> <mailto:framers-unsubscribe at lists.frameusers.com>
> or visit
> http://lists.frameusers.com/mailman/options/framers/john.sgammato%40actifio.com
>
> Send administrative questions to listadmin at frameusers.com
> <mailto:listadmin at frameusers.com>. Visit
> http://www.frameusers.com/ for more resources and info.
>
>
>
> --
>
> Image removed by sender. <http://www.actifio.com/>
>
>
>
>
>
>
>
>
>
> *John Sgammato, Documentation Architect*
> *e*john.sgammato at actifio.com <mailto:john.sgammato at actifio.com>
> *c* 508.927.2083 <tel:508.927.2083>
> *t* @actifiodocs <http://twitter.com/actifiodocs>
>
> 333 Wyman Street, Waltham, MA 02451
>
> Image removed by sender. <http://twitter.com/actifio> Image
> removed by sender. <http://www.linkedin.com/company/399246> Image
> removed by sender.
> <https://plus.google.com/102870897962348937868/posts> Image
> removed by sender. <http://www.youtube.com/user/actifio> Image
> removed by sender. <http://www.actifio.com/>
>
> /Radically simple copy data management /
>
> /./
>
>
>
>
> --
>
> <http://www.actifio.com/> *John Sgammato, Documentation Architect*
> *e* john.sgammato at actifio.com <mailto:john.sgammato at actifio.com> *c*
> 508.927.2083
> *t*@actifiodocs <http://twitter.com/actifiodocs>
>
> 333 Wyman Street, Waltham, MA 02451
>
> <http://twitter.com/actifio> <http://www.linkedin.com/company/399246>
> <https://plus.google.com/102870897962348937868/posts>
> <http://www.youtube.com/user/actifio> <http://www.actifio.com/>
>
> /Radically simple copy data management /
>
> /.//
> /
>
>
>
> _______________________________________________
>
>
> You are currently subscribed to framers as sp10 at leximation.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit http://lists.frameusers.com/mailman/options/framers/sp10%40leximation.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.frameusers.com/pipermail/framers-frameusers.com/attachments/20140814/2425b40e/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 823 bytes
Desc: not available
URL: <http://lists.frameusers.com/pipermail/framers-frameusers.com/attachments/20140814/2425b40e/attachment.jpeg>
More information about the framers
mailing list