No rtf output generated from Mif2Go

[Jeff Coatsworth]

Did you grab the right version of MIF2Go for FM12? I seem to recall talk about a different version required for FM12.

From: framers-bounces at lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of LGLists
Sent: October-01-14 11:24 AM
To: 'Post Framers'
Subject: No rtf output generated from Mif2Go

FM 12 (new installation)
Win 7
m2g 55

I posted this to the Mif2Go Yahoo Group a couple of days ago, but have not heard anything back. I'm hoping someone here can help me.

I think I followed all the steps to install. Tore my hair out doing it. (I'd much rather just have an installer.)

All I need is a simple conversion to RTF. I did the basics that I've done before. Here's what I get:

Console shows this:

Mif2Go could not write F:\path_removed\RTF-Test\Overview.mif
Mif2Go created file: F:\path_removed\RTF-Test\Overview.rtf
in: 0 min 00 seconds at: Sun Sep 28 16:20:01 2014

There is no rtf file in my output folder, despite what the message says.

Log has no errors:

Sun Sep 28 16:19:57 2014
I1: Starting log for m2rbook, b114 and f009, project "Overview"
I1: Opened file F:\path_removed\Overview.fm
I1: File ID is aa
Sun Sep 28 16:20:00 2014
I1: Starting log for drmif, m210
I1: Automation processing completed by drmif.
Sun Sep 28 16:20:01 2014
I1: Starting log for dwrtf, r299
I1: Automation processing completed by dwrtf.
Sun Sep 28 16:20:03 2014
I1: Project finished
I1: Closing log for m2rbook


When I try to Wash Via Mif for a single file, the console shows this:

Mif2Go could not write F:\path_removed\Overview.tmb


F: is a partition on my hard drive with plenty of space on it.

I tried again on a mostly blank, new file, and I can't even get the .ini file to be created when I configure a new project in a new folder.

Any ideas?

~~~~~~~~~~~~~~~~~~~~~~~~~
Linda G. Gallagher
STC Fellow
TechCom Plus, LLC
lindag at techcomplus dot com
www.techcomplus.com<http://www.techcomplus.com/>
303-450-9076 or 800-500-3144
Tutorials, "show me" demos, user guides, help, FrameMaker and WebWorks ePublisher templates
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.frameusers.com/pipermail/framers-frameusers.com/attachments/20141001/1f545f24/attachment.htm>