[Framers] Single Doctype, Multiple Applications

[ian.proudfoot at itp-x.co.uk]

Rick, although I couldn't find any info on the options here is an example
from my 2011 archive:
<?Fmwd AppName "Your XML app name"?>
This must be placed after the XML declaration but before the root element.

I just tried it and it still works.
Ian

-----Original Message-----
From: Framers
<framers-bounces+ian.proudfoot=itp-x.co.uk at lists.frameusers.com> On Behalf
Of Rick Quatro
Sent: 31 July 2018 15:52
To: 'An email list for people using Adobe FrameMaker software.'
<framers at lists.frameusers.com>
Subject: Re: [Framers] Single Doctype, Multiple Applications

Hi Ian,

If you can steer me in that direction, that would be great. It sounds like
exactly what I need. Thank you very much.

Rick

-----Original Message-----
From: Framers <framers-bounces+rick=rickquatro.com at lists.frameusers.com> On
Behalf Of ian.proudfoot at itp-x.co.uk
Sent: Tuesday, July 31, 2018 9:37 AM
To: 'An email list for people using Adobe FrameMaker software.'
<framers at lists.frameusers.com>
Subject: Re: [Framers] Single Doctype, Multiple Applications

Hi Rick,
There is a poorly documented special processing instruction that could be
what you need. It was originally used to help with S1000D support where
everything uses the same doctype of 'dmodule'.  I can't find any mention of
it in the maker.ini guide which was where it is configured if I remember
correctly... Nothing in the struct app developer's guides either. I'll keep
looking.
For the Adobe S1000D applications it was handled using ExtendScript where
the selected XML file was opened silently using the built-in E4X support in
ES and the relevant structural clues used to  determine the correct
Structured Application to use.

Ian

-----Original Message-----
From: Framers
<framers-bounces+ian.proudfoot=itp-x.co.uk at lists.frameusers.com> On Behalf
Of Rick Quatro
Sent: 31 July 2018 13:20
To: 'An email list for people using Adobe FrameMaker software.'
<framers at lists.frameusers.com>
Subject: [Framers] Single Doctype, Multiple Applications

Hi All,

 

I have a bunch of DITA concepts, but about a dozen different templates. I
want to have a structured application for each one, so I can specify
appropriate templates and transforms for each concept. If I have multiple
applications with the same doctype, can I get FrameMaker to prompt me for
which application to use when I open a ditamap or concept? Thank you very
much.

 

Rick

 

Rick Quatro

Carmen Publishing Inc.

rick at frameexpert.com

585-729-6746 NEW!

 

 

 

 

_______________________________________________

This message is from the Framers mailing list

Send messages to framers at lists.frameusers.com Visit the list's homepage at
http://www.frameusers.com Archives located at
http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listadmin at frameusers.com

_______________________________________________

This message is from the Framers mailing list

Send messages to framers at lists.frameusers.com Visit the list's homepage at
http://www.frameusers.com Archives located at
http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listadmin at frameusers.com

_______________________________________________

This message is from the Framers mailing list

Send messages to framers at lists.frameusers.com Visit the list's homepage at
http://www.frameusers.com Archives located at
http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listadmin at frameusers.com