[Framers] PDFs and FM 2019

[Rick Quatro]

Dan,

When you Save As PDF or use File > Publish, all of that is taken care of for
you in the background.

Rick

-----Original Message-----
From: Framers <framers-bounces+rick=rickquatro.com at lists.frameusers.com> On
Behalf Of Harding, Dan
Sent: Friday, March 29, 2019 11:03 AM
To: An email list for people using Adobe FrameMaker software.
<framers at lists.frameusers.com>
Subject: Re: [Framers] PDFs and FM 2019

Hi Winfried,

Thank you for the reply. I might be going back too far in the annals of
FrameMaker history, but I recall that one of the reasons to ensure that
Adobe PDF was the printer selected was to make sure that everything looked
the same on screen as it would ultimately appear in the PDF, as the font
information used in the display was somewhat dependent upon the print driver
selected. At least at one point, depending on the printer you had selected,
having the printer not being Adobe PDF was a Bad Thing(tm).

Is that no longer the case, or am I misremembering?

-Dan

-----Original Message-----
From: Framers <framers-bounces+dharding=illinois.edu at lists.frameusers.com>
On Behalf Of Reng Winfried
Sent: Friday, March 29, 2019 7:24 AM
To: An email list for people using Adobe FrameMaker software.
<framers at lists.frameusers.com>
Subject: Re: [Framers] PDFs and FM 2019

Hi Dan,

I also have FM 2019 64 bit and could not install SetPrint.
However, I think it's not needed any longer (only, if you want to print to a
file).
If you create a PDF via Save As PDF or via the Publish pod (with Use Acrobat
Distiller for PDF generation activated), the PDF is created correctly. I do
not notice any difference, when the printer is set to a physical printer or
to Adobe PDF.

When you create the PDF without Distiller, then you do not need SetPrint
anyway.

I also have some issues when FrameMaker creates the PDF.
I hope that this gets fixed soon!

Best regards

Winfried

-----Original Message-----
From: Framers
<framers-bounces+w.reng=carecom-solutions.com at lists.frameusers.com> On
Behalf Of Harding, Dan
Sent: Thursday, March 28, 2019 5:00 PM
To: framers at lists.frameusers.com
Subject: [Framers] PDFs and FM 2019

...
1. Sundorne's Setprint no longer appears to work, presumably because it was
a 32-bit application and is incompatible with 64-bit FM. Is there a 64-bit
version of that utility or some other method to always set the printer to
Adobe PDF whenever opening a document? The error I receive is as follows:
...
2. More of an FYI than an issue: By default, FrameMaker 2019 is configured
to NOT use Acrobat Distiller to create PDFs... why I have no idea. When I
used the default config, my PDFs had all sorts of missing elements
throughout the document... placed graphics, running feet, you name it. It
was only when I checked the box to use Distiller that I got fully intact
PDFs.
_______________________________________________

This message is from the Framers mailing list

Send messages to framers at lists.frameusers.com Visit the list's homepage at
http://www.frameusers.com Archives located at
http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listadmin at frameusers.com
_______________________________________________

This message is from the Framers mailing list

Send messages to framers at lists.frameusers.com Visit the list's homepage at
http://www.frameusers.com Archives located at
http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listadmin at frameusers.com