Problems with Mif2Go conversion

Wed Jul 16 10:55:48 PDT 2014

Hi, Fred:

I did look into that, but the bin folder is not there; this is what I'm seeing in terms of a hierarchy:

[cid:image002.jpg at 01CFA0E4.7F5E0710]

Thanks,
  Bob

From: Fred Ridder [mailto:docudoc at hotmail.com]
Sent: Wednesday, July 16, 2014 10:48 AM
To: Prestridge, RobertX H
Subject: RE: Problems with Mif2Go conversion

Have you looked in the C:\bin\pkzip25 directory? That's the directory where the "add" command was invoked.
________________________________
From: robertx.h.prestridge at intel.com<mailto:robertx.h.prestridge at intel.com>
To: wreng at tycoint.com<mailto:wreng at tycoint.com>
Subject: RE: Problems with Mif2Go conversion
Date: Wed, 16 Jul 2014 16:41:14 +0000
CC: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>
Dr. Reng:

Thank you for writing; I hope that your Wednesday has started off well.

I see in my log file that a .zip file is being created, but this .zip file is not appearing in my DITA conversion folder (i.e., the subfolder _ship), and this .zip file is not appearing in any local/temp files.

Below appear my log file and the .ini file.

Thanks again, especially if you can provide any insights!

Bob

***
Log file

Tue Jul 15 15:24:57 2014
I1: Starting log for m2rbook, b114 and f009, project "AppendixE"
I1: Opened file C:\Users\rhprestx\Desktop\files\E_EMTA_Intel-552 Design Considerations.fm
I1: File ID is ah
Tue Jul 15 15:25:01 2014
I1: Starting log for drmif, m210
I1: Automation processing completed by drmif.
Tue Jul 15 15:25:02 2014
I1: Starting log for dwhtm, h293
I1: Gathering files...
I1: del C:\Users\rhprestx\Desktop\DITA_conversion\_wrap /q
I1: copy /Y "%omsyshome%\common\system\htmlidx\idxhtm.css" "C:\Users\rhprestx\Desktop\DITA_conversion\_wrap"
I1: cd C:\Users\rhprestx\Desktop\DITA_conversion\_wrap
I1: Archiving...
I1: "C:\bin\pkzip25" -add E_EMTA_Intel-552 Design Considerations.zip *.*
I1: Putting in shipping directory...
I1: move /Y "E_EMTA_Intel-552 Design Considerations.zip" "C:\Users\rhprestx\Desktop\DITA_conversion\_ship"
I1: Automation processing completed by dwhtm.
***
.ini file

; _m2dita.ini - Starting Mif2Go configuration for DITA output

[Templates]
; Where the rest of the configuration settings are:
Configs=%omsyshome%\m2g\local\config\local_m2dita_config.ini

[Setup]
FileSuffix=xml
UseFrameTOC=No
UseFrameIX=No
UseFrameGenFiles=No
ConvertVariables=Yes
PrjFileName=C:\Users\rhprestx\Desktop\files\E_EMTA_Intel-552 Design Considerations.prj
IDFileName=C:\Users\rhprestx\Desktop\files\mif2go.ini
PluginVersion=b114
ProjectName=AppendixE
FrameBook=
FrameChapter=C:\Users\rhprestx\Desktop\files\E_EMTA_Intel-552 Design Considerations.fm
WriteEquations=No
WriteAllGraphics=No
UseExistingMIF=No
UseExistingDCL=No

[Automation]
; Whether and where to assemble and archive output:
WrapAndShip=Yes
ShipPath=C:\Users\rhprestx\Desktop\DITA_conversion\_ship
; Archive name and version for output:
;ArchiveName=YourProject
;ArchiveVer=
; Where to find graphics for this project:
;CopyGraphicsFrom=.\..
GraphCopyFiles=*.jpg *.gif
ArchiveName=E_EMTA_Intel-552 Design Considerations

[HTMLOptions]
; Default page title for output:
;Title=Your default DITA page title here
ObjectIDs=Referenced
FileSuffix=.dita
NoFonts=Yes
AlignAttributes=No
AllowOverrides=No
StartingSplit=No

[CSS]
UseCSS=No

[DITAOptions]
DITAVer=1
DefTopic=concept
DefParaElem=p
DefCharElem=ph

[DITAParaTags]
Body=p
Heading*=title
Numbered=li
Numbered1=li
Bulleted=li
FigureTitle=title
TableTitle=title
CellBody=p
CellHeading=p

[DITAParaAttributes]

[DITAParaTypographics]

[DITACharTags]
Emphasis=i

[DITACharAttributes]

[DITACharTypographics]

[DITALevels]
Title=1
Heading*=3

[DITAParents]
Title=topic
Heading*=section
Numbered1=ol
Numbered=ol
Bulleted=ul
FigureTitle=fig

[DITAParentAttributes]

[DITAFirst]
Heading*=section
Numbered1=ol

[DITAAliases]

[DITACloseBefore]

[DITACloseAfter]

[DITAOpenBefore]

[DITAOpenAfter]

[DITAElementSets]
$top=body section step
$text=body conbody taskbody refbody section example step refsyn entry
$list=ol ul

[DITATopics]

[DITATables]

[DITAMapLevels]

[DITAMapUsage]

[DITARelGroups]

[DITARelBookGroups]

[DITAContentModels]

[Graphics]
UseOriginalGraphicNames=No

[End]

***

From: Reng, Dr. Winfried [mailto:wreng at tycoint.com]
Sent: Tuesday, July 15, 2014 11:32 PM
To: Prestridge, RobertX H
Subject: RE: Problems with Mif2Go conversion

Hi Bob,

You also checked the content of any zip files which might have been created, didn't you?

Best regards

Winfried

From: framers-bounces at lists.frameusers.com<mailto:framers-bounces at lists.frameusers.com> [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Prestridge, RobertX H
Sent: Tuesday, July 15, 2014 5:46 PM
To: Yves Barbion
Cc: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>
Subject: RE: Problems with Mif2Go conversion

And I'm checking the Wrap and Ship button before attempting production.

Thanks,
  Bob

From: framers-bounces at lists.frameusers.com<mailto:framers-bounces at lists.frameusers.com> [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Prestridge, RobertX H
Sent: Tuesday, July 15, 2014 8:32 AM
To: Yves Barbion
Cc: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>
Subject: RE: Problems with Mif2Go conversion

Hi, Yves:

Here's what the log file says:

Mon Jul 14 15:36:34 2014
I1: Starting log for dwhtm, h293
I1: Gathering files...
I1: del C:\Users\rhprestx\Desktop\DITA_conversion\_wrap /q
I1: copy /Y "%omsyshome%\common\system\htmlidx\idxhtm.css" "C:\Users\rhprestx\Desktop\DITA_conversion\_wrap"
I1: cd C:\Users\rhprestx\Desktop\DITA_conversion\_wrap
I1: Archiving...
I1: "C:\bin\pkzip25" -add 01_Introduction_Intel-552 Design Considerations.zip *.*
I1: Putting in shipping directory...
I1: move /Y "01_Introduction_Intel-552 Design Considerations.zip" "..\..\_ship"
I1: Automation processing completed by dwhtm.

Thanks for any help or insight that you can provide.

Bob

From: Yves Barbion [mailto:yves.barbion at gmail.com]
Sent: Tuesday, July 15, 2014 8:06 AM
To: Prestridge, RobertX H
Cc: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>
Subject: Re: Problems with Mif2Go conversion

Hi Robert
What does the _m2g_log.txt file say? Normally, you should get a .ditamap file and one or more .dita or .xml files.
Cheers

--
Yves Barbion
www.scripto.nu<http://www.scripto.nu>

________________________________

This e-mail contains privileged and confidential information intended for the use of the addressees named above. If you are not the intended recipient of this e-mail, you are hereby notified that you must not disseminate, copy or take any action in respect of any information contained in it. If you have received this e-mail in error, please notify the sender immediately by e-mail and immediately destroy this e-mail and its attachments.

_______________________________________________ You are currently subscribed to framers as DocuDoc at hotmail.com<mailto:DocuDoc at hotmail.com>. Send list messages to framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com<mailto:framers-unsubscribe at lists.frameusers.com> or visit http://lists.frameusers.com/mailman/options/framers/docudoc%40hotmail.com Send administrative questions to listadmin at frameusers.com<mailto:listadmin at frameusers.com>. Visit http://www.frameusers.com/ for more resources and info.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.frameusers.com/pipermail/framers-frameusers.com/attachments/20140716/c37e7ecc/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 21635 bytes
Desc: image002.jpg
URL: <http://lists.frameusers.com/pipermail/framers-frameusers.com/attachments/20140716/c37e7ecc/attachment.jpg>