Can't Generate PDF SOLVED

[Davis, David]

Well why the devil should the PDF generation fail if you select RGB mode?
And what if you *want* it to be in RGB mode? (as you quite legitimately might do!)
Bugtastic!

And Matt, on your blog:
" Font handling
Deselect this ambiguous option: 'Rely on system fonts only; do not use document fonts'"

There's nothing ambiguous about that option! And it's very sensible. I wouldn't advise anyone to deselect it.
Otherwise, Distiller can create a PDF which references fonts which are only present in a document that's currently open and loaded in RAM on your PC.
It is likely these will not embed properly and so you will be creating a PDF that has limited portability.

David


Message: 8
Date: Wed, 4 Jun 2014 15:38:12 -0700
From: Karen Robbins <karendesign at gmail.com>
To: Matt Sullivan <sullivanmattr at gmail.com>
Cc: framers at lists.frameusers.com
Subject: Re: Can't Generate PDF SOLVED
Message-ID: <p0624081ccfb54fc9dd9d@[192.168.1.66]>
Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"

Matt,

RGB-CMYK was the culprit! I just tested with CMYK
checked in the PDF settings, and the file
rendered correctly. I switched that back to RGB
and it failed.

Thank you!

--Karen

At 3:22 PM -0700 6/4/14, Matt Sullivan wrote:
>Here's what I ran into recently?hope it helps!
><http://www.mattrsullivan.com/blog/fm/framemaker-pdf-snags-and-solutions/>http://www.mattrsullivan.com/blog/fm/framemaker-pdf-snags-and-solutions/
>
>
>-Matt
>
>Matt R. Sullivan
>co-author <http://framemaker11book.com/>Publishing
>Fundamentals: Unstructured FrameMaker 11
>P: 714.798.7596 | C: 714.585.2335
>| <mailto:matt at mattrsullivan.com>matt at mattrsullivan.com
>

*** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys Limited, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please select the Legal Entities link at invensys.com. Invensys Limited is owned by the Schneider-Electric Group.

You may contact Invensys Limited on +44 (0)20 3155 1200 or e-mail reception at invensys.com. This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates).