Can't Generate PDF SOLVED

[Craig Ede]

Another CMYK/RGB oddity: Logo graphics positioned over a background on our
master page lose their transparency when printed to RGB PDF (ugly) but
retain it when printed to CMYK.

C-

-----Original Message-----
From: framers-bounces at lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Davis, David
Sent: Friday, June 06, 2014 2:49 AM
To: framers at lists.frameusers.com
Subject: Re: Can't Generate PDF SOLVED

Well why the devil should the PDF generation fail if you select RGB mode?
And what if you *want* it to be in RGB mode? (as you quite legitimately
might do!) Bugtastic!

And Matt, on your blog:
" Font handling
Deselect this ambiguous option: 'Rely on system fonts only; do not use
document fonts'"

There's nothing ambiguous about that option! And it's very sensible. I
wouldn't advise anyone to deselect it.
Otherwise, Distiller can create a PDF which references fonts which are only
present in a document that's currently open and loaded in RAM on your PC.
It is likely these will not embed properly and so you will be creating a PDF
that has limited portability.

David


Message: 8
Date: Wed, 4 Jun 2014 15:38:12 -0700
From: Karen Robbins <karendesign at gmail.com>
To: Matt Sullivan <sullivanmattr at gmail.com>
Cc: framers at lists.frameusers.com
Subject: Re: Can't Generate PDF SOLVED
Message-ID: <p0624081ccfb54fc9dd9d@[192.168.1.66]>
Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"

Matt,

RGB-CMYK was the culprit! I just tested with CMYK checked in the PDF
settings, and the file rendered correctly. I switched that back to RGB and
it failed.

Thank you!

--Karen

At 3:22 PM -0700 6/4/14, Matt Sullivan wrote:
>Here's what I ran into recently?hope it helps!
><http://www.mattrsullivan.com/blog/fm/framemaker-pdf-snags-and-solution
>s/>http://www.mattrsullivan.com/blog/fm/framemaker-pdf-snags-and-soluti
>ons/
>
>
>-Matt
>
>Matt R. Sullivan
>co-author <http://framemaker11book.com/>Publishing
>Fundamentals: Unstructured FrameMaker 11
>P: 714.798.7596 | C: 714.585.2335
>| <mailto:matt at mattrsullivan.com>matt at mattrsullivan.com
>

*** Confidentiality Notice: This e-mail, including any associated or
attached files, is intended solely for the individual or entity to which it
is addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then delete
this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person. This email comes
from a division of the Invensys Group, owned by Invensys Limited, which is a
company registered in England and Wales with its registered office at 3rd
Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For
a list of European legal entities within the Invensys Group, please select
the Legal Entities link at invensys.com. Invensys Limited is owned by the
Schneider-Electric Group.

You may contact Invensys Limited on +44 (0)20 3155 1200 or e-mail
reception at invensys.com. This e-mail and any attachments thereto may be
subject to the terms of any agreements between Invensys (and/or its
subsidiaries and affiliates) and the recipient (and/or its subsidiaries and
affiliates).
_______________________________________________


You are currently subscribed to framers as craigede at hotmail.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/craigede%40hotmail.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.