[Framers] slow-scrolling images

Mon Apr 11 13:50:10 PDT 2016

Actually, thanks to John Sgammato for that info.

FWIW, though, I would prefer to let Windows reset back to the default printer normally - but not within FrameMaker. So, I think SetPrint is still very useful for my needs ...

Z

> -----Original Message-----
> From: Framers [mailto:framers-
> bounces+syed.hosain=aeris.net at lists.frameusers.com] On Behalf Of Lea
> Rush
> Sent: Monday, April 11, 2016 10:40 AM
> To: framers at lists.frameusers.com
> Subject: Re: [Framers] slow-scrolling images
> 
> Sweet! I didn't know that setting was there. Thanks, Syed!
> 
> Lea
> 
> Lea Rush
> Software and Documentation Specialist
> Astoria-Pacific
> www.astoria-pacific.com
> P: 800-536-3111, +1-503-657-3010
> 
> -----Original Message-----
> From: Framers [mailto:framers-bounces+lea=astoria-
> pacific.com at lists.frameusers.com] On Behalf Of John Sgammato
> Sent: Monday, April 11, 2016 10:26 AM
> To: Syed Zaeem Hosain
> Cc: framers at lists.frameusers.com
> Subject: Re: [Framers] slow-scrolling images
> 
> If you're using Windows 10, there is a setting that can mess with your printer
> settings.
> Settings > Devices > Printers & Scanners > then scroll down to Let Windows
> manage my default printer and set it to Off.
> When this is On, the default printer is the last used printer.
> 
> On Mon, Apr 11, 2016 at 1:17 PM, Syed Zaeem Hosain
> <Syed.Hosain at aeris.net>
> wrote:
> 
> > Yeah ... assuming that I am doing it right, I see the same issue with
> > FrameMaker 12 .. no printer setting stickiness in standard FrameMaker.
> >
> > So, for me too, SetPrint is still the working method!  :)
> >
> > Z
> >
> > > -----Original Message-----
> > > From: Craig, Alison [mailto:acraig at bkultrasound.com]
> > > Sent: Monday, April 11, 2016 10:02 AM
> > > To: Fred Ridder <DocuDoc at hotmail.com>; Syed Zaeem Hosain
> > > <Syed.Hosain at aeris.net>; Robert Lauriston <robert at lauriston.com>;
> > > framers at lists.frameusers.com
> > > Subject: RE: [Framers] slow-scrolling images
> > >
> > > It was certainly still an issue in 2009 with Frame 9 - which is the
> > first version
> > > that I used.
> > >
> > > And when I switched to Frame 12 I still needed SetPrint.
> > >
> > > Alison
> > >
> > > -----Original Message-----
> > > From: Framers [mailto:framers-
> > > bounces+acraig=bkultrasound.com at lists.frameusers.com] On Behalf Of
> > > Fred Ridder
> > > Sent: Sunday, April 10, 2016 8:47 AM
> > > To: Syed Zaeem Hosain; Robert Lauriston;
> > > framers at lists.frameusers.com
> > > Subject: Re: [Framers] slow-scrolling images
> > >
> > > The SetPrint plug-in was only necessary with older versions of
> > FrameMaker --
> > > 6.x and earlier, if I recall correctly -- which used whatever was
> > > the
> > current
> > > Windows printer as its default printer. The problem with that
> > > approach
> > was
> > > that even if you set the FrameMaker printer to "Adobe PDF" (or
> > > whatever name Adobe was using at the moment, because they changed
> > > the designation a few times in that era), the next time you launched
> > > Frame
> > the
> > > printer would be set back to your current Windows selection (usually
> > > a physical printer).
> > >
> > > The FrameMaker team eventually got it right and gave FrameMaker its
> > > own default printer selection that was "sticky" and completely
> > > independent of the Windows printer selection, thus eliminating the
> > > need for the Sundorne plug-in.
> > >
> > > -FR
> > >
> > > ________________________________________
> > > From: Framers <framers-
> > > bounces+docudoc=hotmail.com at lists.frameusers.com> on behalf of
> Syed
> > > Zaeem Hosain <Syed.Hosain at aeris.net>
> > > Sent: Saturday, April 9, 2016 3:58 PM
> > > To: Robert Lauriston; framers at lists.frameusers.com
> > > Subject: Re: [Framers] slow-scrolling images
> > >
> > > Robert Lauriston said:
> > > > FrameMaker's default printer should always be set to Adobe PDF.
> > >
> > > Yes!
> > >
> > > And, there is a FrameMaker plug-in that can automate this while
> > > using FrameMaker - very easy to install and not worry about this
> > > specific
> > issue.
> > >
> > > Free from Sundorne:
> > > http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm
> > >
> > > Callable from FrameScript too.
> > >
> > > Z
> > _______________________________________________
> >
> > This message is from the Framers mailing list
> >
> > Send messages to framers at lists.frameusers.com Visit the list's
> > homepage at  http://www.frameusers.com Archives located at
> > http://www.mail-archive.com/framers%40lists.frameusers.com/
> > Subscribe and unsubscribe at
> > http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
> > Send administrative questions to listadmin at frameusers.com
> >
> 
> 
> 
> --
> 
> <http://www.actifio.com/>        *John Sgammato, Documentation Architect*
> *e* john.sgammato at actifio.com  *c* 508.927.2083
> *t* @actifiodocs <http://twitter.com/actifiodocs>
> 
> 333 Wyman Street, Waltham, MA 02451
> <http://twitter.com/actifio>    <http://www.linkedin.com/company/399246>
> <https://plus.google.com/102870897962348937868/posts>
> <http://www.youtube.com/user/actifio>    <http://www.actifio.com/>
> 
> *Manage, access, and protect your data with a single platform that saves you
> time, money, and complexity.*
> _______________________________________________
> 
> This message is from the Framers mailing list
> 
> Send messages to framers at lists.frameusers.com Visit the list's homepage at
> http://www.frameusers.com Archives located at http://www.mail-
> archive.com/framers%40lists.frameusers.com/
> Subscribe and unsubscribe at
> http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
> Send administrative questions to listadmin at frameusers.com
> _______________________________________________
> 
> This message is from the Framers mailing list
> 
> Send messages to framers at lists.frameusers.com Visit the list's homepage at
> http://www.frameusers.com Archives located at http://www.mail-
> archive.com/framers%40lists.frameusers.com/
> Subscribe and unsubscribe at
> http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
> Send administrative questions to listadmin at frameusers.com