[Framers] slow-scrolling images

Mon Apr 11 10:39:32 PDT 2016

Sweet! I didn't know that setting was there. Thanks, Syed!

Lea

Lea Rush 
Software and Documentation Specialist 
Astoria-Pacific
www.astoria-pacific.com
P: 800-536-3111, +1-503-657-3010

Please consider the environment before printing this email. `·.¸¸.·´¯`·.¸.·´¯`·...¸ ><((((º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><((((º>

NOTICE OF CONFIDENTIALITY

This communication is from Astoria-Pacific and is intended to be confidential and solely for the use of the persons or entities addressed above.  If you are not an intended recipient, be aware that the information contained herein may be protected from unauthorized use by privilege or law, and any copying, distribution, disclosure, or other use of this information is prohibited.  If you have received this communication in error, please contact the sender by return email or telephone (503) 657-3010 immediately, and delete or destroy all copies.  Thank you for your cooperation.

-----Original Message-----
From: Framers [mailto:framers-bounces+lea=astoria-pacific.com at lists.frameusers.com] On Behalf Of John Sgammato
Sent: Monday, April 11, 2016 10:26 AM
To: Syed Zaeem Hosain
Cc: framers at lists.frameusers.com
Subject: Re: [Framers] slow-scrolling images

If you're using Windows 10, there is a setting that can mess with your printer settings.
Settings > Devices > Printers & Scanners > then scroll down to Let Windows manage my default printer and set it to Off.
When this is On, the default printer is the last used printer.

On Mon, Apr 11, 2016 at 1:17 PM, Syed Zaeem Hosain <Syed.Hosain at aeris.net>
wrote:

> Yeah ... assuming that I am doing it right, I see the same issue with 
> FrameMaker 12 .. no printer setting stickiness in standard FrameMaker.
>
> So, for me too, SetPrint is still the working method!  :)
>
> Z
>
> > -----Original Message-----
> > From: Craig, Alison [mailto:acraig at bkultrasound.com]
> > Sent: Monday, April 11, 2016 10:02 AM
> > To: Fred Ridder <DocuDoc at hotmail.com>; Syed Zaeem Hosain 
> > <Syed.Hosain at aeris.net>; Robert Lauriston <robert at lauriston.com>; 
> > framers at lists.frameusers.com
> > Subject: RE: [Framers] slow-scrolling images
> >
> > It was certainly still an issue in 2009 with Frame 9 - which is the
> first version
> > that I used.
> >
> > And when I switched to Frame 12 I still needed SetPrint.
> >
> > Alison
> >
> > -----Original Message-----
> > From: Framers [mailto:framers-
> > bounces+acraig=bkultrasound.com at lists.frameusers.com] On Behalf Of
> > Fred Ridder
> > Sent: Sunday, April 10, 2016 8:47 AM
> > To: Syed Zaeem Hosain; Robert Lauriston; 
> > framers at lists.frameusers.com
> > Subject: Re: [Framers] slow-scrolling images
> >
> > The SetPrint plug-in was only necessary with older versions of
> FrameMaker --
> > 6.x and earlier, if I recall correctly -- which used whatever was 
> > the
> current
> > Windows printer as its default printer. The problem with that 
> > approach
> was
> > that even if you set the FrameMaker printer to "Adobe PDF" (or 
> > whatever name Adobe was using at the moment, because they changed 
> > the designation a few times in that era), the next time you launched 
> > Frame
> the
> > printer would be set back to your current Windows selection (usually 
> > a physical printer).
> >
> > The FrameMaker team eventually got it right and gave FrameMaker its 
> > own default printer selection that was "sticky" and completely 
> > independent of the Windows printer selection, thus eliminating the 
> > need for the Sundorne plug-in.
> >
> > -FR
> >
> > ________________________________________
> > From: Framers <framers-
> > bounces+docudoc=hotmail.com at lists.frameusers.com> on behalf of Syed
> > Zaeem Hosain <Syed.Hosain at aeris.net>
> > Sent: Saturday, April 9, 2016 3:58 PM
> > To: Robert Lauriston; framers at lists.frameusers.com
> > Subject: Re: [Framers] slow-scrolling images
> >
> > Robert Lauriston said:
> > > FrameMaker's default printer should always be set to Adobe PDF.
> >
> > Yes!
> >
> > And, there is a FrameMaker plug-in that can automate this while 
> > using FrameMaker - very easy to install and not worry about this 
> > specific
> issue.
> >
> > Free from Sundorne:
> > http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm
> >
> > Callable from FrameScript too.
> >
> > Z
> _______________________________________________
>
> This message is from the Framers mailing list
>
> Send messages to framers at lists.frameusers.com Visit the list's 
> homepage at  http://www.frameusers.com Archives located at 
> http://www.mail-archive.com/framers%40lists.frameusers.com/
> Subscribe and unsubscribe at
> http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
> Send administrative questions to listadmin at frameusers.com
>

-- 

<http://www.actifio.com/>        *John Sgammato, Documentation Architect*
*e* john.sgammato at actifio.com  *c* 508.927.2083
*t* @actifiodocs <http://twitter.com/actifiodocs>

333 Wyman Street, Waltham, MA 02451
<http://twitter.com/actifio>    <http://www.linkedin.com/company/399246>
<https://plus.google.com/102870897962348937868/posts>
<http://www.youtube.com/user/actifio>    <http://www.actifio.com/>

*Manage, access, and protect your data with a single platform that saves you time, money, and complexity.* _______________________________________________

This message is from the Framers mailing list

Send messages to framers at lists.frameusers.com Visit the list's homepage at  http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listadmin at frameusers.com